Starter Solution
C1823/C6625/C6578/HP51641
PhotoSmart C3844/C3845

Instructions for starter solution:

1. Place cartridge in cartridge clip, not necessary, but suggested.
2. Using Drill tool from Atlascopy.com or similar instrument, push each of the fill hole plugs into the cartridge.
3. Using Ink Injector w/4" Needle supplied by Atlascopy.com, inject 1cc of starter solution into each chamber. Clean needle with water between colors.
4. Using GRAVITY FEED, dispense 5 to 6cc ink into each color chamber. You will need to modify the injector in order for this to work. You will need to drill a small hole with the drill tool at the 6cc mark on the injector.
5. Complete step 4 for each color, cleaning injector with water between colors.
6. Do Not reseal the fill holes. Air must replace the ink as it is used.